0412 571 528

Films and How They Work

Benefits of Car Window Tinting

There are many different types and styles of tinting that can be applied to your windows, with varying benefits. These may be aesthetic, UV blocking, temperature control, glare reduction, and safety. Class One Window Tinting has many years of experience and offer both a convenient mobile service or an in-store choice. Some of the benefits of installing a top quality automotive window film will be:

  • Enhanced appearance
  • Ultra Violet Protection – 99% Ultra Violet Rejection
  • Heat Rejection
  • Glare Reduction
  • Infra Red Heat Reduction
  • SPF Rating of 55+
  • Improved Privacy
  • Less Load On AC Units
  • Protection Of Interior
  • Strengthens Glass & Helps Hold Together In Event Of An Accident

How Window Tinting Works

Window tinting for your car is installed by pressure sensitive mounting adhesives forming a bond onto your glass surface. Window tinting film is usually made from clear polyester film with a very thin and even layer of tinting agents such as carbon and/or metals deposited onto the film. Window films are applied on the inner surface blocking visible light as well as the harmful cancer-causing ultra-violet (UV-A and UV-B) rays as well as infra-red (IR) rays that cause heat to build up in your car. How effective your window tint will perform in relation to heat rejection and UV rejection will depend on the type of film technology, the manufacturer, and the quality of installation

Window Tinting & U.V. Protection

All of Class One’s Window Tinting film’s have Ultra Violet protection and will block out 99% of the deadly UV rays as well as offer a sunscreen rating of 55+. Very impressive, you physically cannot get sunburnt behind the protective barrier of a good quality window film.

Tinting Your Car For Heat Rejection

The most common misrepresentation of window films for your car, is the belief that a darker tint will stop more heat than a lighter one. In many cases, this couldn’t be further from the truth. New technology in the form of ‘spectrally selective films’ is now allowing manufacturers to develop solar film that can target the specific parts of the light spectrum that cause heat (U.V. & Infra Red). These films will be almost transparent and yet stop more heat than any dark coloured tint could ever hope to achieve.

Very dark tints are often produced by adding dye to the lamination process (usually mixed in with the bonding adhesive) giving the appearance of a darker look and a more dominant glare reduction. The down side to this process, is that often the dye, made up of blue, yellow & red dyes to produce black, will be affected over time by the suns U.V. radiation, causing the yellow dye to fade away faster than the blue and red. This causes what is often seen on older style cars that appear to have purple coloured tinting.

The introduction of nanotechnology to the window film industry has lead to many breakthroughs in recent years, allowing films that are virtually transparent to offer better heat reduction than much darker films through ‘spectral selection’. This technology allows the film to prevent only certain parts of the total light spectrum to pass through the film. By blocking 99% of U.V. rays, and a large percentage of the Infra Red radiation, this new breed of film is capable of allowing a large amount of visible light to be transmitted while still being able to leave the room, or car very cool inside. Come in and see us for a demonstration